Pre-Stressed Concrete Spun Pole Spinning Machine

Working Principle
1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.

2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
3. The speed of separation is slow when the viscosity of slurry is high.
4. It is good for centrifugal sedimentation when the slurry density is different in each component.

Technical Parameter
Top end inner diameter (mm) Tread (mm) Running wheel diameter (mm) Length (m)
150 2000 600 7-12
170 2000 600 7-12
190 2000 650 7-15
230 2000 650 6-9
300 equal diameter 2000 600 6-9
350 equal diameter 2000 650 6-12
310 2000 650-780 6-15

Features
1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; Employing high stress steel wire can save 40%~69%).
2. Crack resistance can increase about 3~5 times.
3. Rigidity increases 1~3 times.
4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; Using high stress steel wire can reduce 12%~21%).
5. Good durability, can delay the existence and expansion of cracks.
6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.